Cheshire Cat Computing

Hi,Any idea on how to configure MRTG Bundle to view Individual interface description. I tried to use the Long Desc field in Router2.conf but I've to confess its really a big headache to configure all the individual routers interfaces with the desc.
I can see that all the interfaces does have the desc filed.

E.g:


### Interface 4 >> Descr: 'Serial1/1' | Name: 'Se1/1' | Ip: '192.168.1.1' | Eth: '' ###

Target[Router_Se1_1]: #Se1/1:public@Router:
SetEnv[Router_Se1_1]: MRTG_INT_IP="192.168.1.1" MRTG_INT_DESCR="Serial1/1"
MaxBytes[Router_Se1_1]: 256000
Title[Router_Se1_1]: #Se1/1 -- Router
PageTop[Router_Se1_1]: <H1>#Se1/1 -- Router</H1>
<TABLE>
<TR><TD>System:</TD> <TD>Router in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Serial1/1 2M connection to Sydney from EAST for Access </TD></TR> <TR><TD>ifType:</TD> <TD>propPointToPointSerial (22)</TD></TR>
<TR><TD>ifName:</TD> <TD>Se1/1</TD></TR>
<TR><TD>Max Speed:</TD> <TD>2048.0 kbits/s</TD></TR>
<TR><TD>Ip:</TD> <TD>192.168.1.1 ()</TD></TR>
</TABLE>


But I dont see the Description field in Router2.cgi front end.

Any help will be greatly appreciated.
Thx a lot

_________________
Srikrishna Komatineni