First, awesome work, MRTG works great on routers! Props
I'm a linux newbie, and I'm guessing there is a simple answer here-
How can I get MRTG to graph data from a UPS like ulitity voltage, battery status, off power etc. I promise I've done some digging around, I've seen some solutions using rrdt but I had all kinds of dependency issues trying to make that work. Perhaps Im wrong but with some tweaking cant MRTG pull those values? My lack of understanding how the mibs work prolly isnt helping. Here is a quick snippet from snmpwalk to the device Matrix 5000 (10.10.10.99):
[root@BadKarma mrtg]# @BadKarma mrtg]# snmpwalk -v 1 -c public 10.10.10.99 |more
SNMPv2-MIB::sysDescr.0 APC Web/SNMP Management Card (MB:v3.3.2 PF:v1.0.5 PN:apc_hw
02_aos_105.bin AF1:v1.0.5 AN1:apc_hw02_sumx_105.bin MN: AP9617 HR: 9 SN: JA0216016
309 MD: 04/19/2002) (Embedded PowerNet SNMP Agent SW v2.2 compatible)
SNMPv2-MIB::sysObjectID.0 SNMPv2-SMI::enterprises.318.1.3.3.2
DISMAN-EVENT-MIB::sysUpTimeInstance 651250
SNMPv2-MIB::sysContact.0 Administrator
-bash: @BadKarma: command not found
SNMPv2-MIB::sysName.0 APC1
SNMPv2-MIB::sysLocation.0 Vaps Basement
SNMPv2-MIB::sysServices.0 72
IF-MIB::ifNumber.0 1
IF-MIB::ifIndex.1 1
IF-MIB::ifDescr.1 lance
IF-MIB::ifType.1 7
IF-MIB::ifMtu.1 1500
IF-MIB::ifSpeed.1 100000000
IF-MIB::ifPhysAddress.1 0:c0:b7:66:49:3a
[root@BadKarma mrtg]# SNMPv2-MIB::sysDescr.0 APC Web/SNMP Management Card (MB:v3.3.2 PF:v1.0.5 PN:apc_hw
-bash: syntax error near unexpected token `('
[root@BadKarma mrtg]# 02_aos_105.bin AF1:v1.0.5 AN1:apc_hw02_sumx_105.bin MN: AP9617 HR: 9 SN: JA0216016
-bash: 02_aos_105.bin: command not found
[root@BadKarma mrtg]# 309 MD: 04/19/2002) (Embedded PowerNet SNMP Agent SW v2.2 compatible)
-bash: syntax error near unexpected token `)'
[root@BadKarma mrtg]# SNMPv2-MIB::sysObjectID.0 SNMPv2-SMI::enterprises.318.1.3.3.2
-bash: SNMPv2-MIB::sysObjectID.0: command not found
[root@BadKarma mrtg]# DISMAN-EVENT-MIB::sysUpTimeInstance 651250
-bash: DISMAN-EVENT-MIB::sysUpTimeInstance: command not found
[root@BadKarma mrtg]# SNMPv2-MIB::sysContact.0 Administrator
-bash: SNMPv2-MIB::sysContact.0: command not found
[root@BadKarma mrtg]# SNMPv2-MIB::sysName.0 APC1
-bash: SNMPv2-MIB::sysName.0: command not found
[root@BadKarma mrtg]# SNMPv2-MIB::sysLocation.0 Vaps Basement
-bash: SNMPv2-MIB::sysLocation.0: command not found
[root@BadKarma mrtg]# SNMPv2-MIB::sysServices.0 72
-bash: SNMPv2-MIB::sysServices.0: command not found
[root@BadKarma mrtg]# IF-MIB::ifNumber.0 1
-bash: IF-MIB::ifNumber.0: command not found
[root@BadKarma mrtg]# IF-MIB::ifIndex.1 1
I tried to download the mib from APC but it saves it as a txt file and im not exactly sure where it goes or if that format is right??
Anyone mind offering a bit of help? Or is it even possible?
Thanks in advance!