Steve,
I passed RRDs.pm but I can't see any graphics (switch information)
When you select the switch/router. I only see the following;
Traffic Analysis for 192.168.1.109 -- ddc2924
Last update: Sat Feb 4 09:19:46 2006
*.cfg:
./cfgmaker --global 'WorkDir: /var/www/mrtg' \
--global 'Options[_]: bits,growright' \
--global 'LogFormat: rrdtool' \
--global 'PathAdd: /usr/local/rrdtool-1.2.11/bin/' \
--global 'LibAdd: /usr/local/rrdtool-1.2.11/lib/perl/5.8.6/i386-linux-thread-multi/' \
--output /var/www/mrtg/cfg/192.168.1.109.cfg \
--ifref=ip \
community_info@192.168.1.109
File Created under: /var/www/mrtg/cfg/192.168.1.109.cfg / OK
*.rrd:
env LANG=C /usr/local/mrtg-2/bin/mrtg /var/www/mrtg/cfg/*.cfg
File created under; /var/www/mrtg/192.168.1.109_192.168.1.109.rrd / OK
routers2.conf - checked configuration/modified as needed: / OK
==============
If I ran only
./cfgmaker --global 'WorkDir: /var/www/mrtg' \
--global 'Options[_]: bits,growright' \
& update;
files created under /var/www/mrgt/ and can see graphic.
Any suggestions, what am I doing wrong?
Thanks for any inputs!
DDemirchi
-almost there
