| Cheshire Cat Computing http://steveshipway.org/forum/ |
|
| Threshold question http://steveshipway.org/forum/viewtopic.php?f=2&t=557 |
Page 1 of 1 |
| Author: | mgriffin3 [ Sat Mar 26, 2005 10:45 am ] |
| Post subject: | Threshold question |
We current have threshold set for CPU utilization and also for bandwidth utilization. The alerting works fine for both, but the graphs display "funny". For the cpu utilization I have: ThreshMaxI[target]: 75 This displays correctly on the graph as 75% For wan links I have: ThreshMaxI[target]: 60% Again the alerting works correctly, but my graphs are wrong. On a t3 link with maxbytes set to 5526250, the graphs show a threshold of around 3 meg. The exact number escapes me at the moment. This was with 2.16 beta5. I put 2.16 beta6 on today, and now for anything with a % I don't see the threshold line at all. Is there any way to fix this? |
|
| Author: | stevesh [ Sat Mar 26, 2005 11:26 am ] |
| Post subject: | |
Hmm, beta 6 may have broken it. Can you post the relevant portions of the cfg file? I will test this when the office opens again on Tuesday. Thanks for the notification... |
|
| Author: | mgriffin3 [ Sat Mar 26, 2005 12:10 pm ] |
| Post subject: | |
YLegend[target-cpu]: Percentage CPU load ShortLegend[target-cpu]: % Directory[target-cpu]: target Legend1[target-cpu]: Avg 1 min CPU Utilization in % Legend2[target-cpu]: Avg 5 min CPU Utilization in % LegendI[target-cpu]: Avg 1 min CPU Load: LegendO[target-cpu]: Avg 5 min CPU Load: WithPeak[target-cpu]: ywm MaxBytes[target-cpu]: 100 Options[target-cpu]: integer, gauge, nopercent Unscaled[target-cpu]: dwmy ThreshMaxI[target-cpu]: 75 ThreshProgI[target-cpu]: /opt/mrtg-2.10.15/bin/cpu.pl The cpu utilization still works correctly, and always has when graphed. Target[target_1]: 1:community@target: SetEnv[target_1]: MRTG_INT_IP="xx.xx.xx.xx" MRTG_INT_DESCR="Serial3/0" Directory[target_1]: target MaxBytes[target_1]: 5526250 ThreshDesc[target_1]: Interface Serial3/0 ThreshMaxI[target_1]: 60% ThreshProgI[target_1]: /opt/mrtg-2.10.15/bin/bandwidthin.pl ThreshMaxO[target_1]: 60% ThreshProgO[target_1]: /opt/mrtg-2.10.15/bin/bandwidthout.pl Title[target_1]: Serial3/0 This one now doesn't display a threshold line at all, or the legend for it in the graph. The previous version I had (2.16beta5 showed the line, but appeared to have the wrong value. It would show the line at I think about 3.2 mb/s, where I would expect ~26.5mb/s. The only configuration change I made between the two version is I added: optimise = yes I have changed it back to no and it still doesn't display. |
|
| Author: | stevesh [ Wed Mar 30, 2005 4:35 pm ] |
| Post subject: | |
| Author: | mgriffin3 [ Fri Apr 01, 2005 5:19 am ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 12 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|