]]>
]]>
]]>
]]>
]]>
]]>
]]>
]]>
]]>
I am using the host template for Cisco ACE load balancer monitoring, getting the following message while executing cfgmaker "Wide character in print at /usr/bin/cfgmaker line 879, <MIB> line 13451.". Please give your suggestion to fix this.
Thank you!
Statistics: Posted by santha — Sat Oct 30, 2010 8:26 am
]]>
]]>
Wonder if you can help me out here, I have been trying to get your new template to work, some of it works ok arounf interface stats, the parts around CPU, Current connection, Total Connections, Op and admin state don't work.
I am getting the below errors in the mrtglog
2009-06-28 16:36:04 -- Unknown SNMP var cpmCPUTotalMonIntervalValue.1
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cpmCPUTotal1minRev.1
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverTotalConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.49.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverTotalConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.49.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverCurrentConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.49.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverCurrentConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.49.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverOperStatus.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.49.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverAdminStatus.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.49.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverTotalConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.50.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverTotalConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.50.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverCurrentConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.50.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverCurrentConns.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.50.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverOperStatus.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.50.0
at c:/mrtg/mrtg/bin/mrtg line 2202
2009-06-28 16:36:04 -- Unknown SNMP var cesServerFarmRserverAdminStatus.4.10.77.65.66.66.67.85.65.84.83.70.10.87.71.82.78.66.67.87.48.48.50.0
Must be doing something wrong but can't figure out what, SNMP is not my strong point but learning alot about it curently.
Any help would be good.
On a side note if a run an SNMP walk fiind the above in the the walk and then graph them in that tool it works OK, I have check the number string on the end of the SNMP var above and that seems to be OK, so I am assuming the issue id around the SNMP var name bit at the begining.
Any help would be great
Thanks in advance
Tim
Statistics: Posted by NetBod — Mon Jun 29, 2009 4:51 am
]]>
The '<TABLE>' error is because those lines following PageTop should all start with a space, which seems to have been removed in the code above (because it is not in a [code] tag)
Statistics: Posted by stevesh — Mon Feb 23, 2009 9:58 am
]]>
OK, fix that, I was using the wrong MIB by the looks of it.
snmpMIB_to_OID("/MRTG/MIBS/CISCO-PROCESS-MIB-V1SMI.my");
Tried this one and I do not get the error now.
snmpMIB_to_OID("/MRTG/MIBS/CISCO-PROCESS-MIB.mib");
Still got a problem thou, does not seem to be able to graph the CPU, seeing this error in the MRTG log, it is updating the .ok file now.
ERROR: Target[10.90.0.121.cpu1][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
ERROR: Target[10.90.0.121.cpu1][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data
Also I had this error in the MRTG log after fixing the other error
ERROR: Line 58 (<TABLE>) in CFG file (c:/mrtg/mrtg/bin/cfg-files/10.90.0.121.cfg) does not make sense
Had a look atr the cfg file and changed it to look like this, which solved the error I was seeing.
PageTop[10.90.0.121.cpu1]: <H1>WWK6509ACE-1 Processor Load</H1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>WWK6509ACE-1 </td>
</tr>
<tr>
<td>Location:</td>
<td> </td>
</tr>
</table>
</div>
Cheers
Tim
Statistics: Posted by NetBod — Sat Feb 21, 2009 12:25 am
]]>
Thats for the info, finally worked it out and got MRTG to use the templates ok. So i have tried to use you ACE template, I am further on with it, but I am seeing this error, have you any idea what it may relate to
Unknown SNMP var cpmCPUTotalMonIntervalValue
at (eval
line 14Unknown SNMP var cpmCPUMonInterval.
at (eval
line 18Unknown SNMP var cpmCPUTotal5secRev
at (eval
line 50I have found the MIBs in the template on the web and pointed the template to them as per below
snmpMIB_to_OID("/MRTG/MIBS/CISCO-SMI-V1SMI.my");
snmpMIB_to_OID("/MRTG/MIBS/CISCO-TC-V1SMI.my");
snmpMIB_to_OID("/MRTG/MIBS/CISCO-PROCESS-MIB-V1SMI.my");
snmpMIB_to_OID("/MRTG/MIBS/ENTITY-MIB-V1SMI.my");
snmpMIB_to_OID("/MRTG/MIBS/CISCO-ENHANCED-MEMPOOL-MIB-V1SMI.my");
I am just not sure sure why the error is showing up, the .cfg file looks OK, but it does not generate the .ok file, I asume that is because of the above error.
Any ideas would be helpful.
Also does this template collect number of connection for real servers, I have had alook at it and don't think it does, do you have a template to do that by any chance to save reinventing the wheel..
Thanks for the help
Tim
Statistics: Posted by NetBod — Fri Feb 20, 2009 10:57 pm
]]>